白枕鹤的分布和迁徙

白枕鹤(Grus vipio)是濒危鹤种之一,国家一级保护动物。白枕鹤分布于六国,在苏联、蒙古、中国繁殖,在中国、北朝鲜、南朝鲜、日本越冬。本文对白枕鹤在中国的分布范围有新的补充。通过对日本山阶鸟类研究所环志的白枕鹤“J17”的观察证明,在1984～1987年春季均从日本迁徙到中国黑龙江扎龙自然保护区沼泽湿地繁殖。1987年6月18日,中日环志合作调查组捕捉环志了“J17”的幼雏,环志号Q00-0663,红彩环“61”。10月7日“J17”的家族南迁,于12月3日到达日本出水鹤类越冬地,环志回收说明白枕鹤迁徙于中国繁殖地和日本越冬地,是确凿无疑。     

台湾杉引种造林试验初报

台湾杉在来舟林业试验场经6年的引种造林试验表明;1年生苗高16cm,造林4年后幼林平均高2.99m,胸径3.96cm;造林初期生长较缓慢,第4年明显加快;育苗与造林技术均容易掌握,具有重要的引种价值。     

Biological activity of phenolic compounds from Alchornea glandulosa

From the isopropyl acetate fraction obtained by partition of the leaves ethanolic extract of Alchornea glandulosa, six phenolic compounds were isolated and identified. General lethality of the extract, fractions and compounds were assayed with Brine Shrimp Test (BST) and with Antifeedant Activity Bioassay (AAB) against neonate larvae of Spodoptera frugiperda. Aqueous fraction and ethyl gallate, one of the major constituents of the polar fraction, have shown the highest toxicity in BST. Ethanolic extract, isopropyl acetate fraction and gallic acid reduced significantly larval growth of S. frugiperda neonates.     

入世条件下林业可持续发展问题的探讨

世界贸易组织(简称WTO)，作为处理世界自由贸易机制的国际组织，允许为可持续发展和保护自由贸易和环境选择利用世界自然资源。中国作为世界贸易组织成员国，签定入世议定书，入世后中国在林业的可持续发展方面受到世界贸易组织的条约和原则的制约和挑战。中国的林业资源应当作为基础资源加以保护，政府的行政管理职能在世界贸易组织的原则下加以改革。因此，中国林业的可持续发展的目．标是优先处理环境保护和经济发展的关系。在入世条件下，按照世界惯例，中国林业资源可持续发展问题瞄准中国林业体制改革，以便适用中国天然林业战略，依靠科技进步依法保护中国环境，特别是在中国林业保护和处理环境和自然资源等关系方面。依据世界贸易组织的协议和规则，建立林业的生态化体系，尤其是GATT20条的规定，保护中国林业可持续发展，为中国林业创建国际环境。表1参21。     

Development, manufacture and application of Beta-Cypermethrin aqueous capsule suspension

The optimal formula of Beta-Cypermethrin aqueous capsule suspension was screened out through the experiment,preparation and manufacture of basic formulas, which has no sedimentation, suspended drops of oil, peels and agglomerating and the diameter of capsule is in range of 10-30μm, conformed to the technical requirement. The aftereffect of the 3.3% Beta-Cypermethrin aqueous capsule suspension which was manufactured according to the optimal formula was up more than 25 days. The experiments on controlling the larvae of Dendrolinmus superans Butler and the adults of Xylotrechus rusticus L were carried out with different concentrations of this chemical. The death rate reached 80% when 250 times solution of the chemical was sprayed on stem to control the larvae of D. superans. For control of the adults of X. rusticus, 200, 400 and 600 times solution of the chemical were applied and their control effects (death rate) reached 85.23%, 74.21% and 66.59% respectively. Two kinds of solution (200 times and 300 times) of the chemical were used to control the larvae of D. superans in large area, and the control effect for both concentrations was over 90%.     

浅谈高层建筑施工方法的选择

本文阐述了高层建筑的结构形式和施工速度与施工方法的选择。     

林区公路线形设计浅谈

本文作者结合自己多年的工程实践,对林区公路线形设计进行了论述,并提出了一些理论与实践相结合的方法。     

Influence of main site factors on Fraxinus mandshurica（Oleaceae） plantation

The investigation was carried out on 10-year-old plantation of Fraxinus mandshurica in Mao‘er Mountain Experimental Station of Northeast Forest University.tree height(H),diameter at breast height(D1.3) and the increment of tree height in 5 years (H5),the thickness of humus layer,as well as the soil moisture were measured for the plantation and the growth indexes(H,D1.3,H5) for different site conditions were analyzed.The results showedthat main site factors influencing the growth of Fraxinus mandshurica were soil moisture,gradient and location of siope in order.The growth of Fraxinus mandshurica was better on the middle-or up-slope site than on the down-slope site.Soil moisture and late frost caused by terrain are the main reasons that limit the growth of Fraxinus mandshurica plantation.     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

Biflavonoids from Podocalyx loranthoides

Analysis of the ethyl acetate extract of the aerials parts of Podocalyx loranthoides led to the isolation of I 7, II 4'-dimethylamentoflavone (1) and II 4'-methylamentoflavone (2). Compound (1) gave a moderate effect against Leishmania mexicana promastigotes.